业余无线电论坛

标题: Industrial wifi6 Wireless AP/DR AP6018 S AIPQ6010 2T2R supporting QCN9074 wif... [打印本页]

作者: wallys 时间: 2022-12-5 13:49
标题: Industrial wifi6 Wireless AP/DR AP6018 S AIPQ6010 2T2R supporting QCN9074 wif...
DR-AP-6018-S-A
QCN9074 WiFi Card IPQ6010,802.11ax,2x2 2.4G&5G,
Support OpenWRT

Description

DR-AP6018-S-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S (IPQ6010) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE);

1 x Enclosure.

Dipole antenna

■ 2 x 2.4G&5G Antenna

■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface

■ Plastic rod of black

■ RoHS compliance

Enclosure

■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material

■ Two Version:

DR-AP6018-S-AB (color black)

DR-AP6018-S-AO (color orange)

■ Support Wally DR6018-S

Absolute Maximum Rating

Parameter	Rating	Unit
Supply Voltage	24V~48V(DC Jack)	V
Operating Temperature Range	-40 to +70	ºC
Storage Temperature Range	-45 to +105	ºC
Operating Humidity Range	5 to +95 (non-condensing)	%

Hardware Specifications

Symbol	Parameter
CPU	Qualcomm-Atheros IPQ6010
CPU Frequency	Quad-core ARM 64 bit A53 @1.8 GHz processor
System Memory	1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design
Ethernet Port	1 x 1Gbps Ethernet Ports & POE 1x 1Gbps Ethernet Ports
NGFF Slot	M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0(For WiFi Module)
SD Card Slot	1x SD Card Slot(Option)
USB /header	1x USB 3.0 Port(Option)
POE	24V~48V passive POE/Active POE(Suport 802.3bt)
DC Jack	24V~48V power supply
LED header	2.0 pitch pin header
Serial Port	1x Serial Port 4 Pin Connector
Wireless	On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain 4 x MMCX Connectors
Nor Flash	8MB
Nand Flash	256MB
DDR	256MB~512MB
Dimension	133mm x 128mm x 44mm

Boot Config Switch

Boot_Config Switch1(S7)
Boot_Config			Boot up InterfaceSelect
S7A	S7B	S7C
0	0	0	SPI NOR. (Default)
0	0	1	eMMC
0	1	0	QPIC, Parallel NAND
0	1	1	USB3.0
1	0	0	SPI-NOR-GPT
S7D			Boot up InterfaceSelect
0			Boot from code ram.(Default)
1			Boot from ROM
Boot_Config Switch2(S9)
Boot_Config			Boot up InterfaceSelect
0			No auth.(Default)
1			Auth is required

We'll start with a quick review of how Wi-Fi has changed over the years.

In fact, the earliest generation of 802.11 standard can be traced back to 1997, when the wireless speed is very low, only 2Mbps, it is an original standard of the first generation .

With the introduction of 802.11b in 1999, the physical layer speed was increased to 11Mbps and there were very few commercial applications. At that time, Wi-Fi was still far away from people's lives

In 2003, the third generation of the standard, 802.11a/ g. Laptop began to configure wireless network card and home wireless router appeared in large quantity . Wi-fi comes into ordinary family.

Skype/EMAIL/Teams：sales@wallystech.com

WEB:https://www.wallystech.com/

欢迎光临业余无线电论坛 (http://bbs.cqcqcq.com/)